facebook  twitter  linkedin  pinterest  tumblr
Service Hotline
+86-13510974563
Tel:86-755-28772795
Email: sales@halnziye.com
搜索
Search
About Us
联系我们
Check category
/
/
/
Thermal Management: The Basics of Heat Transfer

Thermal Management: The Basics of Heat Transfer

  • Categories:Events
  • Author:
  • Origin:
  • Time of issue:2019-12-24 00:00
  • Views:

(Summary description)heat management basic factors

Thermal Management: The Basics of Heat Transfer

(Summary description)heat management basic factors

  • Categories:Events
  • Author:
  • Origin:
  • Time of issue:2019-12-24 00:00
  • Views:
Information

Thermal Management centers around the movement and removal of heat from a system, often in electronics. This includes heat spreading, heat transfer, and heat dissipation.

 

Heat Spreading

Heat spreaders offer cost-effective, reliable high thermal conductivity and efficacy with almost no moving parts.

A heat spreader is an effective solution for dealing with heat sources that have a high heat-flux density (high heat flow per unit area) and where the secondary heat exchanger in itself is not an effective method of dispersing heat (due to space limitations, energy use, cost, etc.). Heat spreaders can allow designers to use an air-cooled, rather than liquid-cooled, secondary heat exchanger.

 

Most heat spreaders are copper or aluminum plates that function as heat exchangers. Heat spreaders transfer heat between its source and (generally) a secondary heat exchanger. The heat "spreads” from the heat source through the heat spreader, thus moving from a smaller to a larger cross sectional area (the secondary heat exchanger). While the heat flow is the same in the heat spreader as in the secondary heat exchanger, the heat flux density is reduced, making it easier to dissipate the heat via air cooling. The lower heat flux density also allows the secondary heat exchanger to be made of less expensive materials.

 

Heat Transfer

Moving heat by remote heat dissipation with passive devices like heat pipes or loop heat pipes provides an efficient thermal solution with high performance, low weight, low cost and high reliability – there are no moving parts to fail, wear out, replace or lubricate.

Thermal Management: The Basics of Heat Transfer

Heat pipes can be used to move heat over distances ranges from a few inches (>50mm) to greater than 3 feet (> 1 meter). In a heat pipe, heat from a heat source enters the evaporator end of the heat pipe, causing the working fluid to change phase from liquid to vapor. The vapor travels through the vapor space within the heat pipe to the other end, the condenser end, where a heat sink or other secondary heat dissipation device removes the heat energy. The release of heat in the condenser end causes the vapor to condense back to liquid which is absorbed into a capillary wick structure. The capillary wick structures incorporated into the internal walls of a heat pipe allow the liquid condensate inside the heat pipe to return from the condenser section of the heat pipe to the evaporator section via capillary action.

 

The heat-moving efficiency of this thermal solution is determined by factors such as wick, working fluid, diameter, length, bending, flattening and orientation.

 

Dissipating Heat to Air

In many applications, the preferred method of thermal management is convection cooling to air, especially in electronics cooling applications. With Aavid’s heat sink, heat pipe assemblies, and heat spreader technologies, waste heat is typically absorbed from a heat generating device (e.g., an electrical component within an electronics system — i.e. computers and data centers) and then moved or spread for dissipation into the ambient air through either natural or forced (using a fan air mover).

 

Dissipating Heat to Liquid

Applications with large heat loads such as military radars or power electronics often require waste heat to be dissipated into the liquid coolants (water, water/glycol, PAO) of a secondary system for ultimate heat dissipation.

 

Heat Dissipation

 

Fans are the general device for heat dissipation, install it on the heat pipe or heat spreaders,it will takes heats efficiency.

Thermal Management: The Basics of Heat Transfer

Keyword:

Scan the QR code to read on your phone

+86-755-28772795
Add: 3-4/F Bld.D Hehengxing Sci&Tech Park,No.19 Minqing Road,Longhua
District,Shenzhen China
Fax:+86-755-28772796
Email:sales@halnziye.com

Copyright© Shenzhen Halnziye Electronics Co.,Ltd 粤ICP备09218394号 深圳市市场监督管理局企业主体身份公示 Powered by www.300.cn