FAQ of thermal grease&thermal glue and thermal pad

A. Details of the product

1. Thermal Conductivity: higher is better,but there are different test methods,so some thermal conductivity are very high,and some are lower, but have a test is the best way before you buy it if necessary.

2. Packages: we can fill any thermal grease into most of the packages,it is up to your needs.

3. Thermal glue will be dry,but thermal grease will be always grease situation

4. All of our thermal greases&thermal glue&thermal pads are Non-Electrical Conductive

5.Thermal grease is not the dangerous goods,without pungent smell,and it is not flammable or explosive

B. Apply&Move

1. Not more means better, layer with the thickness 0.13mm~0.15mm is the best, if apply too much,it works terrible

2. Clean the surface of heat sink and heat source before you using the thermal grease or thermal glue or thermal pad

3. Adhesive side of the thermal pad to glue the heat sink if you buy thermal pad with one side adhesive

4. Move the thermal grease with alcohol or diethyl ether

C. Stock

1. Stock thermal grease&thermal glue&thermal pad under room temperature,shelf time of thermal grease is 2 years,thermal glue is half a year.

2.Do not stock thermal grease&thermal glue&thermal pad with the strong acid,or in the sun